DS-SS800 Suspended Solids/Sludge Concentration Online Analyzer
Contact Info
- Add:西安市高新區(qū)錦業(yè)二路逸翠尚府北區(qū)8號樓1單元1701, Zip: 710000
- Contact: 魏經(jīng)理
- Tel:15686405979
- Email:[email protected]
Other Products
Measurement Principle:
The suspended solids/sludge concentration sensor is based on the combined infrared absorption and scattering light method. Infrared light emitted by the light source is scattered by suspended particles in the sample, then converted into an electrical signal by the photodetector, and processed through analog and digital signal handling to obtain the suspended solids/sludge concentration of the sample.
Features:
lThe sensor uses dual-beam infrared scattered light photometer detection technology, offering good repeatability and stability;
lApplication of the ISO7027 standard method (infrared light scattering technology) eliminates the influence of sample color;
lBuilt-in self-diagnostic function ensures data accuracy;
lOptional automatic cleaning brush function significantly reduces sensor maintenance;
lDigital sensor with strong anti-interference capability and long transmission distance;
lStandard digital signal output enables integration and networking with other devices without a transmitter;
lEasy and quick on-site installation of the sensor, plug-and-play;
lReverse connection protection for sensor power supply positive and negative poles;
lProtection against incorrect connection of sensor RS485 A/B terminals to power supply;
Typical Applications:
lOnline monitoring of suspended solids/sludge concentration in various processes of sewage treatment plants;
lOnline monitoring of suspended solids/sludge concentration in various industrial process water and wastewater treatment processes.
Sensor Technical Parameters:
Measuring Range | 0.01-20000 mg/L, 0.01-45000 mg/L, 0.01-120000 mg/L |
Measurement Accuracy | Less than ±5% of measured value (depending on sludge homogeneity) |
Repeatability | ±2% |
Resolution | 0.01~1mg/L, depending on the range |
Pressure Range | ≤0.4Mpa |
Flow Rate | ≤2.5m/s, 8.2ft/s |
Calibration | Sample calibration, slope calibration |
Main Materials of Sensor | Body: SUS316L (standard version), titanium alloy (seawater version); Upper and lower covers: POM, Cable: PUR |
Storage Temperature | -15 to 50℃ |
Operating Temperature | 0 to 45℃ (non-freezing) |
Dimensions | Diameter 60mm * Length 261mm |
Weight | 1.65KG |
Protection Rating | IP68/NEMA6P |
Cable Length | Standard 10-meter cable, extendable to 100 meters |
DS-115T Controller Technical Parameters:
Display Output | 128*64 graphic dot matrix LCD with LED strong backlight, operable under direct sunlight |
Power Supply | AC power supply: 85-500VAC (50/60HZ); DC power supply: 9~36VDC |
Main Materials | PA66+GF25+FR (upper cover); Powder-coated aluminum alloy (lower shell) |
Output | Three channels of 4-20mA |
Relay | Three relays, programmatically set response parameters and values |
Digital Communication | Equipped with MODBUS RS485 communication function, enabling real-time transmission of measured values |
Storage Temperature | -20 to 70℃ |
Operating Temperature | -15 to 60℃ |
Waterproof Rating | IP65/NEMA4X |
Dimensions | 145mm*125mm*162mm (L*W*H) |
Weight | 1.35KG |
| Industry Category | Instruments & Meters/Analytical Instruments/Water Quality Analyzers |
|---|---|
| Product Category | |
| Brand: | 西安東升 |
| Spec: | DS-SS800 |
| Stock: | |
| Origin: | China / Shaanxi / Xianshi |
